Single Raised Curtain

Updated: 2022-05-13

This curtains curtain opens by sliding above the stage opening.

Size and Position

1. Rez the curtain on the stage and fit to the opening while closed. Note that the curtain prim is oriented so the control arrows are at the top edge. This should be at or just past the top edge of your stage opening.

2. When it is set, click on the curtain and click 'Config', then click 'Size'. The closed_size will be shown in nearby chat. Copy that into the notecard, replacing the existing closed_size line.

3. Click on the curtain and click 'Open'. The curtains will slize open until they are about 0.5m wide at the edges. Make any adjustments to the size it should be when open, then click on the curtain and click 'Config', then click 'Size'. The open_size will be shown in nearby chat. Copy that into the notecard, replacing the existing open_size line.

4. Add anyone that you want to be able to operate the curtain without having their group set to the notecard on lines beginning with 'allow='. You may use their key (aka UUID) or login name (like 'tomjs').

5. The remainder of the configuration should be pre-set. Change the channel number as required.

Commands

The commands that may be sent to the curtain on the configured channel are:

• reset - Reset the curtain to its configured closed state

• close - Close the curtain

• open - Open the curtain

-- Layne Thomas laynethomas@avimail.org